Item | DT | Card | Conf | Description | Label |
---|
hl7:observation
| | 1 … 1 | M | | LaboonNL |
@classCode
| cs | 1 … 1 | F | OBS |
@moodCode
| cs | 1 … 1 | F | EVN |
hl7:templateId
| II | 1 … 1 | M | Template ID HCIM Lab extension Template id ZIB Lab extensie | LaboonNL |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.2.4.3.11.60.7.10.31 |
hl7:templateId
| II | 1 … 1 | M | Template ID IHE XDLAB Template id IHE XDLAB | LaboonNL |
@root
| uid | 1 … 1 | F | 1.3.6.1.4.1.19376.1.3.1.6 |
hl7:id
| II | 1 … 1 | R | A Laboratory Observation identifier SHOULD be present. De identificatie van de laboratoriumtest MOET aanwezig zijn. | LaboonNL |
hl7:code
| CD | 1 … 1 | R | Unique test code in an international standard (LOINC or SNOMED CT) or a national standard (e.g. JC10 in Japan or NHG Tabel 45 Diagnostische bepalingen in The Netherlands) Unieke code voor de laboratoriumtest in een internationale standaard (LOINC) of een nationale standaard (bijv. NHG Tabel 45 Diagnostische bepalingen in Nederland voor de eerste lijn) | LaboonNL |
| CONF | |
hl7:translation
| CD | 0 … * | | Ruimte voor een equivalente, niet-preferente code uit een ander stelsel dan de preferente code die in hl7:code zelf wordt doorgegeven. Dit ondersteunt migratiescenario's waarin LOINC en NHG Tabel 45 codes naast elkaar worden gestuurd. Merk op dat dit element wat standaard in het datatype bestaat hier voor toekomstige doeleinden is gemarkeerd, zonder nadere duiding hoe om te gaan met preferente versus niet-preferente codes. Element for an equivalent, non-preferred code from another system than the preferred indicated in hl7:code. This supports migration scenarios where LOINC and NHG Table 45 codes are communicated side by side. Note that this standard datatype element is marked here for future purposes, without the explanation that is required to deal with preferred versus non-preferred codes. | LaboonNL |
| CONF | |
hl7:statusCode
| CS | 1 … 1 | M | ‘completed’ when the result is present. ‘aborted’ if the test could not be performed. ‘completed’ als het resultaat aanwezig is. ‘aborted’ als de test niet kon worden uitgevoerd. | LaboonNL |
| CONF | @code shall be "completed" | or | @code shall be "aborted" |
|
hl7:effectiveTime
| TS | 0 … 1 | R | The date and if possible the time at which the test was carried out. De datum en eventueel tijdstip waarop de test uitgevoerd is. | LaboonNL |
hl7:value
| ANY | 0 … 1 | R | The result obtained for this test using the appropriate data type. Numeric results use data type PQ, which includes the unit. The result is absent in case of ‘obsolete’ or ‘aborted’ observation. Mapping NHG table 45 vraagtypes to HL7 datatypes Type | Presentation / screen behavior | HL7 type | Remark | EK | List of predefined answers is available and only one may be chosen (e.g. ‘drop down box’) | CE | The OID for coded answers is 2.16.840.1.113883.2.4.4.30.1045 Note that in Huisartswaarneemgegevens this used to be CV which lacks the option for translation. | MK | List of predefined answers is available and multiple may be chosen (e.g. ‘drop down list with checkboxes’) | CE | Every answer is to be recorded as a separate observation. Note that in Huisartswaarneemgegevens this used to be CV which lacks the option for translation. | VT | Free text field. All inut is allowed. Maximum length is not defined (implementation dependent) | ST | The mime type is text/plain. | NM | Numeric field. Only valid numbers are allowed, with a maximum number of precision as specified. | PQ | Note that if a numeric field does not contain valid numbers (e.g. because of legacy data) then the datatype ST SHALL be used. | DT | Date field. | TS | | JA | Special field that may be used to indicate something has occurred. Comparable to checking a checkbox. If there is no checkmark then the answer is undetermined. (It is not possible to answer No) | BL | | In NHG table 45 only a small part of the observations have defined units, so it is currently not possible to specify the correct UCUM unit for all. The following table provides the mapping to the UCUM notation for units where such a mapping possible. This table is only relevant for datatype PQ. Mapping eenheden NHG tabel 45 - UCUM Unit NHG table 45 | UCUM eenheid | % | % | °C | Cel | cm | cm | dagen | d | dB | dB | jaren | a | kg | kg | kg/m2 | kg/m2 | L | L | L/min | L/min | m | m | mg/l | mg/L | mg/ml | mg/mL | mg/mmol | mg/mmol | micromol/l | umol/L | ml/min | mL/min | ml/min/1,73m2 | mL/min/1.73m2 | mmHg | mm[Hg] | mmol/l | mmol/L | mmol/mol | mmol/mol | weken | wk | x/min | /min | Het resultaat voor deze test met het relevante datatype. Kwantitatieve resultaten gebruiken datatype PQ, inclusief eenheid. Het resultaat is afwezig bij een ‘obsolete’ of ‘aborted’ test. Mapping NHG tabel 45 vraagtypes naar HL7 datatypes Type | Presentatie / gedrag op scherm | HL7 type | Opmerking | EK | Er is een keuzelijst van voorgedefinieerde antwoorden, waaruit er één mag worden gekozen (bv. ‘drop down box’) | CE | De OID voor gecodeerde antwoorden is 2.16.840.1.113883.2.4.4.30.1045 Merk op dat in Huisartswaarneemgegevens nog sprake was van CV waarin de mogelijkheid voor translation (vertalingen) ontbreekt. | MK | Meervoudige keuzes. Een keuzelijst met voorgedefinieerde antwoorden, waarbij er meer dan één keuze gemaakt mag worden (bv. ‘drop down lijst’ met aankruisvakjes ervoor) | CE | Ieder antwoord dient als een aparte observatie te worden opgenomen. Merk op dat in Huisartswaarneemgegevens nog sprake was van CV waarin de mogelijkheid voor translation (vertalingen) ontbreekt. | VT | Vrije tekst veld. Alle invoer is toegestaan. Maximum lengte is niet bepaald (implementatie afhankelijk) | ST | Het mime type is text/plain. | NM | Numeriek veld. Alleen geldige getallen zijn toegestaan, met een maximum aan decimalen zoals gespecificeerd. | PQ | N.B. indien een numeriek veld geen geldige getallen bevat (door bijv. import van legacy data) dan dient het datatype ST gebruikt te worden. | DT | Datum veld. | TS | | JA | Speciaal veld dat gebruikt kan worden om aan te geven dat iets gebeurd is. Vergelijkbaar met een vinkje zetten in een aankruisvak. Zolang er geen vinkje staat is het antwoord onbepaald. (Het is dus niet mogelijk om Nee te antwoorden) | BL | | In NHG tabel 45 zijn slechts bij een klein deel van de metingen de eenheden gespecificeerd, vandaar dat het op dit moment niet mogelijk is om bij alle metingen de juiste UCUM eenheid te specificeren. De onderstaande tabel bevat de mapping naar de UCUM notatie voor eenheden waar dit wel mogelijk is. Deze tabel is alleen relevant bij datatype PQ. Mapping eenheden NHG tabel 45 - UCUM Eenheid NHG tabel 45 | UCUM eenheid | % | % | °C | Cel | cm | cm | dagen | d | dB | dB | jaren | a | kg | kg | kg/m2 | kg/m2 | L | L | L/min | L/min | m | m | mg/l | mg/L | mg/ml | mg/mL | mg/mmol | mg/mmol | micromol/l | umol/L | ml/min | mL/min | ml/min/1,73m2 | mL/min/1.73m2 | mmHg | mm[Hg] | mmol/l | mmol/L | mmol/mol | mmol/mol | weken | wk | x/min | /min | | LaboonNL |
hl7:interpretationCode
| CE | 0 … 1 | R | One or more codes interpreting the result, expressed with ObservationInterpretation vocabulary (e.g. H = high, L = low) In case of a antimicrobial susceptibility test in microbiology, the vocabulary domain is ObservationInterpretationSusceptibility: S = susceptible, R = resistant, I = intermediate. De mapping op de ZIB is: - 281302008 (SNOMED CT) Above reference range = H (ObservationInterpretation) Above reference range
- 281300000 (SNOMED CT) Below reference range = L (ObservationInterpretation) Below reference range
- 11896004 (SNOMED CT) Intermediate = I (ObservationInterpretation) Intermediate
- 30714006 (SNOMED CT) Resistant = R (ObservationInterpretation) Resistant
- 131196009 (SNOMED CT) Susceptible = S (ObservationInterpretation) Sensitive
Eén of meer codes die de interpretatie van het resultaat weergeven, uitgedrukt met waardendomein ObservationInterpretation (bijv. H = te hoog, L = te laag) In het geval van een microbiologische, antimicrobiële gevoeligheidstest, is het waardendomein ObservationInterpretationSusceptibility: S = gevoelig, R = resistent, I = intermediate. De mapping op de ZIB is: - 281302008 (SNOMED CT) Above reference range = H (ObservationInterpretation) Boven referentiewaarde
- 281300000 (SNOMED CT) Below reference range = L (ObservationInterpretation) Onder referentiewaarde
- 11896004 (SNOMED CT) Intermediate = I (ObservationInterpretation) Intermediair
- 30714006 (SNOMED CT) Resistant = R (ObservationInterpretation) Resistent
- 131196009 (SNOMED CT) Susceptible = S (ObservationInterpretation) Sensitief
| LaboonNL |
| CONF | |
hl7:methodCode
| CE | 0 … 1 | R | Method used for this observation expressed with ObservationMethod vocabulary (CWE) Meetmethode uitgedrukt met waardendomein ObservationMethod (CWE) | LaboonNL |
hl7:participant
| | 0 … 1 | | Other participants "AUTHEN", "RESP", and "DEV". - RESP: The person responsible for the provision of the test. In the case where this test is subcontracted to an external laboratory, this external laboratory (with its address and telcom) and the actual performer is represented by a <performer> element, whereas the Director of this subcontractor laboratory is carried by the <participant> element being attached to the same level as the <performer> element.
Andere partijen "AUTHEN", "RESP", en "DEV". - RESP: De verantwoordelijke partij voor de laboratoriumtest. In het geval waar een test is uitbesteed aan een derde partij, wordt dit externe laboratorium (met adres en telecom) en de werkelijke uitvoerende vertegenwoordigd door een element <performer>, terwijl de Directeur/leidinggevende van dit onderaannemende laboratorium wordt meegegeven met het element <participant> gekoppeld aan hetzelfde niveau als het element <performer>.
| LaboonNL |
where [@typeCode='RESP'] | |
@typeCode
| cs | 1 … 1 | F | RESP |
hl7:time
| IVL_TS | 0 … 1 | | | LaboonNL |
Included | 1 … 1 | | from 2.16.840.1.113883.2.4.3.11.60.3.10.3.27 zorgverlener-participantRole (2018‑06‑11) |
hl7:participantRole
| | 1 … 1 | | | zorgbody |
@classCode
| cs | 0 … 1 | | Code uit ConceptDomain RoleClass. Hoofdcode is ROL. Voor zorgmedewerkers is ASSIGNED relevant |
hl7:templateId
| II | 1 … 1 | M | Identificatie van de template voor gegevens van de betrokken zorgverlener | zorgbody |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.2.4.3.11.60.3.10.3.27 |
| Example | <templateId root="2.16.840.1.113883.2.4.3.11.60.3.10.3.27"/> |
Included | 0 … * | | from 2.16.840.1.113883.2.4.3.11.60.3.10.1.30 zorgverleneridentificatienummer (2018‑06‑11) |
Choice | 0 … * | | Elements to choose from:- hl7:id
- hl7:id
- hl7:id
- hl7:id[not(@root = ('2.16.528.1.1007.3.1', '2.16.840.1.113883.2.4.6.1', '2.16.528.1.1007.5.1'))]
|
hl7:id
| II.NL.UZI | 0 … 1 | R | Identificerend nummer van zorgverlener met bijbehorend codesysteem (UZI nummer natuurlijke personen) | zorgmmer |
@root
| uid | 1 … 1 | F | 2.16.528.1.1007.3.1 |
| 2.16.528.1.1007.3.1 is de OID van Zorgverlener UZI |
@extension
| st | 1 … 1 | R | |
| Example | <id root="2.16.528.1.1007.3.1" extension="129854656"/> |
hl7:id
| II.NL.AGB | 0 … 1 | R | Identificerend nummer van zorgverlener met bijbehorend codesysteem (Vektis AGB-zorgverlener tabel) | zorgmmer |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.2.4.6.1 |
| 2.16.840.1.113883.2.4.6.1 is de OID van Vektis AGB‐Z |
@extension
| st | 1 … 1 | R | |
| Example | <id root="2.16.840.1.113883.2.4.6.1" extension="129854656"/> |
hl7:id
| II.NL.BIG | 0 … 1 | R | Identificerend nummer van zorgverlener met bijbehorend codesysteem (BIG register inschrijvingsnummer) | zorgmmer |
@root
| uid | 1 … 1 | F | 2.16.528.1.1007.5.1 |
| 2.16.528.1.1007.5.1 is de OID van BIG Register |
@extension
| st | 1 … 1 | R | |
| Example | <id root="2.16.528.1.1007.5.1" extension="129854656"/> |
hl7:id
| II | 0 … 1 | R | Zorgverleneridentificatienummer anders dan UZI, AGB of BIG. Bij een id (attribuut @extension) hoort een identificatiesysteem (attribuut @root) in de vorm van een OID. In het geval er geen OID bekend is, kan in plaats van een OID in @root, het attribuut @nullFlavor met waarde UNC worden gebruikt. Het verdient de voorkeur om expliciet te maken wat het identificatiesysteem is en de situatie met @nullFlavor=UNC zou dan ook bij voorkeur tijdelijk moeten zijn. | zorgmmer |
where [not(@root = ('2.16.528.1.1007.3.1', '2.16.840.1.113883.2.4.6.1', '2.16.528.1.1007.5.1'))] | |
| Example | ID 12345 uit identificatiesysteem 1.2.3.4.9999 <id root="1.2.3.4.9999" extension="12345"/> |
| Example | ID 12345 uit (nog) onbekend identificatiesysteem <id nullFlavor="UNC" extension="12345"/> |
Included | 0 … 1 | | from 2.16.840.1.113883.2.4.3.11.60.3.10.1.31 specialisme zorgverlener (2018‑06‑11) |
Choice | 0 … 1 | | Elements to choose from: |
hl7:code
| CE | 0 … 1 | | Specialisme van zorgverlener afkomstig uit valueSet SpecialismeAGBCodelijst | specener |
| CONF | |
| Example | <code code="0303" codeSystem="2.16.840.1.113883.2.4.6.7" displayName="Chirurgie"/> |
hl7:code
| CE | 0 … 1 | | Specialisme van zorgverlener afkomstig uit valueSet SpecialismeUZICodelijst | specener |
| CONF | |
| Example | <code code="01.014" codeSystem="2.16.840.1.113883.2.4.15.111" displayName="Chirurg"/> |
hl7:addr
| AD.NL | 0 … 1 | | | zorgbody |
Included | | | from 2.16.840.1.113883.2.4.3.11.60.3.10.1.101 address NL - generic (2018‑06‑11) |
@use
| set_cs | 0 … 1 | | |
| CONF | |
hl7:streetName
| ST | 0 … 1 | R | Straatnaam. Als het adres een postbusnummer is dan dient hier het woord “Postbus” te staan. Als het adres een antwoordnummer is, dan dient hier het woord “Antwoordnummer” te staan. Street name. If the address is a P.O. Box then the Dutch word "Postbus" shall be communicated. If the address is an answer number (mailing address where the receiver pays postage) then the Dutch word "Antwoordnummer" shall be communicated. | AD.NL |
| Example | <streetName>Heereweg</streetName> |
hl7:houseNumber
| ST | 0 … 1 | R | Het element houseNumber moet het huisnummer bevatten. Het huisnummer kan niet-numerieke gedeelten bevatten die het adres mede identificeren, bijv. "23a", maar alleen als de bron deze niet gescheiden kan aanbieden. Huisletter dient indien mogelijk in het element buildingNumberSuffix te worden doorgegeven. Gegevens zoals "to" (woonboten) of "3 hoog achter" maken geen deel uit van dit attribuut. Dit type gegevens is elders in het AD datatype opgenomen. The element houseNumber shall contain the house number. The house number may contains non-numeric parts that further determine the address, e.g. "23a", but only if the source system cannot discretely communicate those. House letter shall, if possible, be communicated through the element buildingNumberSuffix. Information such as "to" (house boats that do not have their own house number, but are across (tegenover) a house with a house number or "3 hoog achter" are not part of this attribute. This type of information is conveyed elsewhere in the AD datatype. | AD.NL |
| Example | <houseNumber>13</houseNumber> |
hl7:buildingNumberSuffix
| ST | 0 … 1 | R | Het element buildingNumberSuffix bevat, indien aanwezig, huisletter en/of huisnummertoevoeging. Het element houseNumber kan dan alleen het numerieke huisnummer bevatten. Export - Als er zowel een huisletter als een huisnummertoevoeging bekend is, dan komt de huisletter eerst, dan een spatie en tenslotte de huisnummertoevoeging.
- Als er alleen een huisletter bekend is, wordt deze in de buildingNumberSuffix doorgegeven. Er hoeft geen spatie achter.
- Als er alleen een huisnummertoevoeging bekend is, wordt deze in de buildingNumberSuffix doorgegeven met een spatie ervoor ter indicatie van een lege huisletter
Import - Als buildingNumberSuffix geen spatie bevat, dan geldt de gehele waarde als huisletter.
- Als buildingNumberSuffix wel een spatie bevat, dan wordt het gedeelte voor de eerste spatie als huisletter geïmporteerd, en het gedeelte na de eerste spatie (de rest) als huisnummertoevoeging.
The element buildingNumberSuffix contains, if relevant, house letter and/or house number suffix. The element houseNumber shall in that case only contain the house number.Export - If a house letter as well as a house number addition is known: house letter first, followed by a space and finally the house letter suffix.
- If only a house letter is known send just that. No trailing space is required.
- If only a house letter suffix is known, communicate that with a leading space.
Import - If the value of buildingNumberSuffix contains no space, then the whole value is considered to be the house letter
- If the value of buildingNumberSuffix contains a space, then everything before the first space is considered to be the house letter, and the everything trailing the first space is considered to be the house number suffix
| AD.NL |
| Example | Huisletter B <buildingNumberSuffix>B</buildingNumberSuffix> |
| Example | Huisnummertoevoeging rood <buildingNumberSuffix> rood</buildingNumberSuffix> |
| Example | Huisletter B, Huisnummertoevoeging rood <buildingNumberSuffix>B rood</buildingNumberSuffix> |
hl7:additionalLocator
| ST | 0 … 1 | R | Aanvullende locatieaanduidingen aanvullend op het postadres. Kan de waarden 'to' (tegenover) of 'by' (bij) zijn. Additional location indicator for the (postal) address. May contains values 'to' (opposite) or 'by' (near). | AD.NL |
| CONF | element content shall be "to" | -or- | element content shall be "by" |
|
hl7:postalCode
| ADXP | 0 … 1 | R | Postcode van het adres. Indien dit een Nederlandse postcode is, dan is het formaat 'nnnn AA' (met spatie). Het is mogelijk om Nederlandse postcodes te coderen volgens NEN5825 (OID 2.16.840.1.113883.2.4.4.15). Let op dat in dit codestelsel Nederlandse postcodes zonder spaties worden gehanteerd. Zip or postal code of the address. If this is a Dutch postal code, then it shall have the format 'nnnn AA' (including the space). It is possible to code Dutch postal codes using the norm NEN5825 (OID 2.16.840.1.113883.2.4.4.15). Please mind that postal codes in that system do NOT have any spaces. | AD.NL |
@code
| | 0 … 1 | | Gecodeerde postcode. Formaat Nederlandse postcodes volgens NEN5825 is 'nnnnAA' Coded postal code. Format of Dutch postal codes compliant with NEN5825 is 'nnnnAA' |
@codeSystem
| | 0 … 1 | | Codesysteem voor gecodeerde postcodes. Voor Nederlandse postcodes is dit NEN5825 OID: 2.16.840.1.113883.2.4.4.15 Code system for coded postal codes. For Dutch postal codes compliant with NEN5825 OID: 2.16.840.1.113883.2.4.4.15 |
hl7:county
| ADXP | 0 … 1 | R | Relevant voor personen. In Nederland wordt dit element gebruikt om de gemeente van inschrijving door te geven (in andere landen kan een ander type administratieve eenheid binnen een staat/provincie gebruikt worden). De gemeente kan, maar hoeft niet, overeen te komen met de stad. Sommige gemeenten, bijvoorbeeld "Waterland", hebben een naam die geheel afwijkt van de steden die erin gelegen zijn. In het HL7-berichtenverkeer wordt de gemeente in Nederland alleen gebruikt in het kader van wettelijke identificatie van personen. Het datatype van county is coded string (SC). Als de gemeente gecodeerd wordt, dan dient Basisregistratie Personen (BRP)/ Gemeentelijke basisadministratie (GBA) tabel 33 (OID 2.16.840.1.113883.2.4.6.14) gebruikt te worden. Code 0000 zoals aanwezig in de GBA Tabel 33 mag onder geen enkele omstandigheid voorkomen in een HL7 versie 3 bericht. Het equivalent van 0000 (onbekende gemeente) in HL7 versie 3 is het niet-opnemen van een code. Relevant for persons. This element is in use in The Nederlands to communicate municipality/county where the person is registered (in other countries this might be in use for a different type of administrative unit within a state/province). The county may, but does not have to, be different from the city. Some counties like "Waterland", span multiple cities. In HL7 messaging we only use county in the Netherlands for legal identification of persons. The datatype of county is coded string (SC). If a county is coded, it shall be based on Basisregistratie Personen (BRP)/ Gemeentelijke basisadministratie (GBA) tabel 33 (OID 2.16.840.1.113883.2.4.6.14). Code 0000 as present in this table shall not be used. The equivalent of 0000 (unknown county) in HL7 V3 is to not add a code. | AD.NL |
hl7:city
| ST | 0 … 1 | R | Plaats City | AD.NL |
hl7:country
| ADXP | 0 … 1 | R | Land volgens Basisregistratie Personen (BRP)/ Gemeentelijke basisadministratie (GBA) tabel 34 Landen (2.16.840.1.113883.2.4.4.16.34) of ISO 3166‐2 alpha (1.0.3166.1.2.2). De landnaam in de text() node is verplicht als het element country wordt gebruikt, maar coderen van het land is niet verplicht. Country coded using Basisregistratie Personen (BRP)/ Gemeentelijke basisadministratie (GBA) tabel 34 Landen (2.16.840.1.113883.2.4.4.16.34) or ISO 3166‐2 alpha (1.0.3166.1.2.2). The country name goes into the text() node and is required if element country is being used, but it is not required to code this element. | AD.NL |
@code
| | 0 … 1 | | Gecodeerd land. Coded country. |
@codeSystem
| | 0 … 1 | | Codesysteem voor gecodeerd land. Code system for a coded country. |
| Example | BRP/GBA Tabel 34 Landen <country code="6030" codeSystem="2.16.840.1.113883.2.4.4.16.34">Nederland</country> |
| Example | ISO 3166-2 alpha <country code="NL" codeSystem="1.0.3166.1.2.2">Nederland</country> |
hl7:unitID
| ST | 0 … 1 | | Een geheel of gedeeltelijke beschrijving van de ligging van een object indien dit niet kan worden aangegeven met de andere adresaanduidingen. NB: het Nederlandse datatype AD versie 1 heeft ook een element <desc/> wat in aanmerking zou kunen komen voor dit type informatie, maar gebruik daarvan wordt niet geadviseerd omdat dit gebruik met CDA zou schaden. In CDA zou het wel als extensie kunnen worden gebruikt. Het internationale datatype AD voorziet niet in een element dat direct geschikt is voor Locatieomschrijving zoals hier bedoeld en dit element moet dan ook als een vorm van misbruik van een niet-gebruikt veld worden gezien. A full or partial description of the location of an object if there's no way to convey that using other address parts. NOTE: The Dutch Datatypes Release 1 includes an element <desc/> that could be used for this type of information, but use of that is ill advised as this would conflict with base CDA usage. In CDA we could add that as an extension. The international datatype AD does not support an element that is intended for conveying Location description as is meant here, and use of the element unitID therefor be a form of misuse of an otherwise unused address component. | AD.NL |
hl7:useablePeriod
| IVL_TS | 0 … 1 | | Het element useablePeriod duidt de periode aan waarin dit adres 'in gebruik'/geldig is/was. De opties zijn: - Er is geen useablePeriod element: het betreffende adres is in principe onbeperkt geldig.
- Er is een onder- en een bovengrens: het adres was geldig in de aangeduide periode.
- Er is alleen een ondergrens: het adres is geldig sinds de aangeduide datum.
- Er is alleen een bovengrens: het adres was geldig t/m de aangeduide datum.
The element useablePeriod contains the period for which this address is/was 'in use'/valid. The options are: - There is no useablePeriod element: the address is considered valid until specified otherwise.
- There is a lower and upper boundary: the address was valid in the given period.
- There's only a lower boundary: the address has been valid since the given date.
- There's only an upper boundary: the address was valid until the given date.
| AD.NL |
| Constraint | In elke situatie waar één of meer adressen worden doorgegeven, moet minimaal het adres worden aangeduid dat op het moment van verzenden geldig/actueel is. Vervallen adressen kunnen dus alleen worden doorgegeven als het betreffende berichtelement herhalend is (dus met cardinaliteit > 1). Adressen mogen ook in de toekomst geldig worden of vervallen als bijvoorbeeld verhuizing reeds bekend is. |
hl7:telecom
| TEL.NL.EXTENDED | 0 … * | | | zorgbody |
where [starts-with(@value,'tel:')] | |
Included | | | from 2.16.840.1.113883.2.4.3.11.60.3.10.1.103 phone number - generic (2018‑06‑11) |
@use
| set_cs | 0 … 1 | | Dit attribuut is een spatie gescheiden lijst van kenmerken. Het kan twee van de kenmerken uit het zib element TelecomType bevatten (MC or PG) en een of meer van de kenmerken uit het element NummerSoort. This attribute is a space separated list of properties. It may cover two of the properties from the hcim element TelecomType bevatten (MC or PG) and one or more of the properties from the element NumberType. |
| CONF | |
@value
| url | 1 … 1 | R | Telefoonnummers bestaan uit een uri beginnend met tel:. Faxnummers bestaan uit een uri beginnend fax:. Let op: een uri bevat bijvoorbeeld geen spaties. Phone numbers consist of a uri starting with tel:. Fax numbers consist of a uri starting with fax:. Note: a uri does not contain whitespace among other things. |
hl7:telecom
| TEL.NL.EXTENDED | 0 … * | | | zorgbody |
where [starts-with(@value,'mailto:')] | |
Included | | | from 2.16.840.1.113883.2.4.3.11.60.3.10.1.104 email address - generic (2018‑06‑11) |
@use
| set_cs | 0 … 1 | | |
| CONF | |
@value
| url | 1 … 1 | R | E-mailadressen bestaan uit een uri beginnend met mailto:. Let op: een uri bevat bijvoorbeeld geen spaties. Email addresses consist of a uri starting with mailto:. Note: a uri does not contain whitespace among other things. |
hl7:playingEntity
| | | | | zorgbody |
@classCode
| cs | 0 … 1 | F | ENT |
hl7:name
| | 0 … 1 | | Contains 2.16.840.1.113883.2.4.3.11.60.3.10.1.100 name person NL - generic (2018‑06‑11) | zorgbody |
Included | 0 … 1 | | from 2.16.840.1.113883.2.4.3.11.60.3.10.0.9 scoping Entity (2018‑06‑11) |
hl7:scopingEntity
| | 0 … 1 | | | scoptity |
@classCode
| cs | 0 … 1 | | |
| CONF | @classCode shall be "ENT" | or | @classCode shall be "ORG" |
|
@determinerCode
| cs | 0 … 1 | F | INSTANCE |
hl7:templateId
| II | 1 … 1 | M | | scoptity |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.2.4.3.11.60.3.10.0.9 |
Included | | | from 2.16.840.1.113883.2.4.3.11.60.7.10.53 zorgaanbiederidentificatienummer (2019‑04‑07 14:36:08) |
Choice | 0 … * | | Elements to choose from:- hl7:id
- hl7:id
- hl7:id
- hl7:id[not(@root = ('2.16.528.1.1007.3.3', '2.16.840.1.113883.2.4.6.1', '2.16.840.1.113883.2.4.6.8'))]
|
hl7:id
| II.NL.URA | 0 … 1 | R | Zorgaanbiederidentificatienummer: UZI Registerabonneenummer (URA). Element bevat @root en @extension. | zorgmmer |
@root
| uid | 1 … 1 | F | 2.16.528.1.1007.3.3 |
| OID van het CIBG UZI‐Register‐Abonneenummer |
@extension
| st | 1 … 1 | R | URA (het CIBG UZI‐Register‐Abonneenummer) |
hl7:id
| II.NL.AGB | 0 … 1 | R | Zorgaanbiederidentificatienummer: De Vektis AGB-Z Zorgaanbieder identificatie. Element bevat @root en @extension. | zorgmmer |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.2.4.6.1 |
| OID van de Vektis AGB-Z Zorgaanbieder identificatie |
@extension
| st | 1 … 1 | R | AGB code |
hl7:id
| II | 0 … 1 | R | Zorgaanbiederidentificatienummer: De Vektis RAV / ambulanceorganisatie ID. Element bevat @root en @extension. | zorgmmer |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.2.4.6.8 |
| OID van de Vektis RAV / ambulanceorganisatie ID |
@extension
| st | 1 … 1 | R | RAV / ambulanceorganisatie id |
hl7:id
| II | 0 … * | R | Zorgaanbiederidentificatienummer anders dan URA, AGB, Vektis RAV ID. Bij een id (attribuut @extension) hoort een identificatiesysteem (attribuut @root) in de vorm van een OID. In het geval er geen OID bekend is, kan in plaats van een OID in @root, het attribuut @nullFlavor met waarde UNC worden gebruikt. Het verdient de voorkeur om expliciet te maken wat het identificatiesysteem is en de situatie met @nullFlavor=UNC zou dan ook bij voorkeur tijdelijk moeten zijn. | zorgmmer |
where [not(@root = ('2.16.528.1.1007.3.3', '2.16.840.1.113883.2.4.6.1', '2.16.840.1.113883.2.4.6.8'))] | |
hl7:code
| CD | 0 … 1 | | Bevat organisatie type | scoptity |
| CONF | |
| Example | <code code="V4" codeSystem="2.16.840.1.113883.2.4.15.1060" displayName="Ziekenhuis"/> |
hl7:desc
| ST | 0 … 1 | R | Bevat naam van de organisatie | scoptity |
| Example | <desc>Spaarne Gasthuis</desc> |
hl7:entryRelationship
| | 0 … * | R | Comment on this Observation Opmerking bij deze laboratoriumtest Contains 1.3.6.1.4.1.19376.1.5.3.1.4.2 IHE Comment Entry (DYNAMIC) | LaboonNL |
@typeCode
| cs | 1 … 1 | F | COMP |
| XDLAB specificeerde niet welke waarde, maar suggereert in zijn voorbeelden COMP. XDLAB did not specify which value, but its examples suggest COMP. |
hl7:entryRelationship
| | 0 … * | R | Specimen Collection, only if not specified at a higher level Details monsterafname, alleen indien niet op een hoger niveau gespecificeerd. Contains 2.16.840.1.113883.2.4.3.11.60.7.10.3 Specimen Collection HCIM (2017‑10‑16) | LaboonNL |
@typeCode
| cs | 1 … 1 | R | XDLAB specificeerde niet welke waarde, maar suggereert in zijn voorbeelden COMP. Uit backward compatibility overwegingen is deze hier niet gefixeerd. XDLAB did not specify which value, but its examples suggest COMP. This value has not been fixed here for backward compatibility reasons. |
hl7:entryRelationship
| | 0 … * | R | Previous observations obtained for the same patient, test, same method, same unit (1) Voorgaande laboratoriumtests voor dezelfde patiënt en test, met dezelfde methode en eenheid (1) | LaboonNL |
where [@typeCode='REFR'] [hl7:observation] | |
@typeCode
| cs | 1 … 1 | F | REFR |
hl7:observation
| | 1 … 1 | R | | LaboonNL |
@classCode
| cs | 1 … 1 | F | OBS |
@moodCode
| cs | 1 … 1 | F | EVN |
hl7:code
| | 1 … 1 | R | | LaboonNL |
hl7:statusCode
| | 1 … 1 | R | | LaboonNL |
@code
| | 1 … 1 | F | completed |
hl7:effectiveTime
| | 1 … 1 | R | | LaboonNL |
hl7:value
| | 1 … 1 | R | | LaboonNL |
hl7:entryRelationship
| | 0 … 1 | R | Laboratory request details, only if not specified at a higher level Labaanvraaggegevens, alleen indien niet op een hoger niveau gespecificeerd. Contains 2.16.840.1.113883.2.4.3.11.60.7.10.47 Laboratory Observation Request NL (2017‑12‑05) | LaboonNL |
@typeCode
| cs | 1 … 1 | F | COMP |
| Merk op dat de waarde COMP niet de beste waarde is. Beste zou FLFS (fulfills) zijn, maar deze wordt niet door CDA ondersteund Please note that COMP is not the best value. This would be FLFS (fulfills), but that is not supported by CDA |
Included | 0 … * | | from 2.16.840.1.113883.2.4.3.11.60.7.10.32 part Encounter reference (2017‑12‑21 12:39:47) Allows a link to an encounter this observation was part of Bevat een koppeling met een contact waar deze observatie/meting deel van was |
hl7:entryRelationship
| | 0 … * | R | Relationship to an encounter. The only required data element encounter id, as means to reference it. Relatie met een contactmoment/bezoek. Het enige verplichte data-element is het id, om daar naar te verwijzen | partence |
where [@typeCode = 'REFR'] [hl7:encounter] | |
@typeCode
| cs | 1 … 1 | F | REFR |
| Example | Verwijzing naar contactmoment/bezoek met id <encounter classCode="ENC" moodCode="EVN"> <id extension="0056465423" root="2.16.528.1.1007.3.3.765332.1.12"/></encounter> |
hl7:encounter
| | 1 … 1 | M | The encounter Het contactmoment/bezoek | partence |
@classCode
| cs | 1 … 1 | F | ENC |
@moodCode
| cs | 1 … 1 | F | EVN |
hl7:id
| II | 1 … 1 | M | Identification encounter Identificatie contactmoment/bezoek | partence |
Included | 0 … * | | from 2.16.840.1.113883.2.4.3.11.60.7.10.33 part Concern reference (2017‑12‑21 12:40:50) Allows a link to a concern/episode that this observation pertains to Bevat een koppeling met een episode waar deze observatie/meting een relatie mee heeft |
hl7:entryRelationship
| | 0 … * | R | Relationship to a health concern. The only required data element is the id, as means to reference it. The code element is also required, but has fixed contents. Relatie met een concern/episode. Het enige verplichte data-element is het id, om daar naar te verwijzen. Het element code is ook verplicht, maar heeft vaste waarden. | partence |
where [@typeCode = 'REFR'] [hl7:act [hl7:code [@code = 'CONC'] [@codeSystem = '2.16.840.1.113883.5.6']]] | |
@typeCode
| cs | 1 … 1 | F | REFR |
| Example | Verwijzing naar concern/episode met id <act classCode="ACT" moodCode="EVN"> <id extension="hc657498ft562.9895" root="2.16.528.1.1007.3.3.765332.1.12"/> <code code="CONC" codeSystem="2.16.840.1.113883.5.6" displayName="Concern"/></act> |
hl7:act
| | 1 … 1 | M | The health concern Het concern/de episode | partence |
@classCode
| cs | 1 … 1 | F | ACT |
@moodCode
| cs | 1 … 1 | F | EVN |
hl7:id
| II | 1 … 1 | M | Identification health concern Identificatie concern/episode | partence |
hl7:code
| CV | 1 … 1 | M | Type act has fixed value HL7 ActClass CONC Type act heeft vaste waarde HL7 ActClass CONC | partence |
@code
| CONF | 1 … 1 | F | CONC |
@codeSystem
| 1 … 1 | F | 2.16.840.1.113883.5.6 |
hl7:referenceRange
| | 0 … 1 | R | Reference range (normal range) for the current test result Referentiewaarden (normaalwaarden) voor het huidige testresultaat | LaboonNL |
where [hl7:observationRange/hl7:interpretationCode/@code = 'N'] | |
@typeCode
| cs | 0 … 1 | F | REFV |
hl7:observationRange
| | 1 … 1 | M | | LaboonNL |
@classCode
| cs | 0 … 1 | F | OBS |
@moodCode
| cs | 0 … 1 | F | EVN.CRT |
hl7:value
| ANY | 0 … 1 | | interval (IVL) representation. Usually this is IVL_PQ. Use attribute xsi:type interval (IVL) weergave. Dit is meestal IVL_PQ. Gebruik hiervoor attribuut xsi:type | LaboonNL |
@xsi:type
| | 1 … 1 | F | ANY |
hl7:interpretationCode
| CE | 1 … 1 | M | Indicator that this reference range concerns the "Normal" reference range Indicator dat dit de referentiewaarden voor "Normaal" betreft | LaboonNL |
@code
| CONF | 1 … 1 | F | N |
@codeSystem
| 1 … 1 | F | 2.16.840.1.113883.5.83 |