Item | DT | Card | Conf | Description | Label |
---|
hl7:ClinicalDocument
| | 1 … 1 | M | | NHv2CDA |
@classCode
| cs | 1 … 1 | F | DOCCLIN |
@moodCode
| cs | 1 … 1 | F | EVN |
hl7:realmCode
| CS | 1 … 1 | M | | NHv2CDA |
@code
| CONF | 1 … 1 | F | CA-BC |
hl7:typeId
| II | 1 … 1 | M | | NHv2CDA |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.1.3 |
@extension
| st | 1 … 1 | F | POCD_HD000040 |
hl7:templateId
| II | 1 … 1 | M | | NHv2CDA |
| Constraint | root is one the BC approved templates, assigning authority is the template name. |
hl7:id
| II | 1 … 1 | M | | NHv2CDA |
@assigningAuthorityName
| st | 1 … 1 | F | NHA CDA ID |
@extension
| guid | 1 … 1 | R | Unique guid for each CDA |
@root
| oid | 1 … 1 | F | 2.16.840.1.113883.3.277.100.3 |
hl7:code
| CE | 1 … 1 | M | | NHv2CDA |
@code
| cs | 1 … 1 | R | |
@codeSystem
| oid | 1 … 1 | F | 2.16.840.1.113883.6.1 |
@displayName
| st | 1 … 1 | R | |
hl7:title
| ST | 1 … 1 | M | | NHv2CDA |
hl7:effectiveTime
| TS | 1 … 1 | M | | NHv2CDA |
hl7:confidentialityCode
| CE (required) | 1 … 1 | M | | NHv2CDA |
@code
| CONF | 1 … 1 | F | N |
@codeSystem
| 1 … 1 | F | 2.16.840.1.113883 |
@codeSystemName
| 1 … 1 | F | Confidentiality |
hl7:languageCode
| CS (required) | 1 … 1 | M | | NHv2CDA |
@code
| CONF | 1 … 1 | F | en-CA |
hl7:recordTarget
| | 1 … 1 | M | | NHv2CDA |
@typeCode
| cs | 1 … 1 | F | RCT |
@contextControlCode
| cs | 1 … 1 | F | OP |
hl7:patientRole
| | 1 … 1 | M | | NHv2CDA |
@classCode
| cs | 1 … 1 | F | PAT |
hl7:id
| II | 0 … 1 | R | BC PHN or other province's equivalent. May or may not be populated. | NHv2CDA |
@root
| oid | 1 … 1 | F | 2.16.840.1.113883.4.50 (based on PID-4.4) |
@extension
| st | 1 … 1 | F | {PID-4.1} |
@assigningAuthorityName
| st | 1 … 1 | F | BC Patient Health Number (based on PID-4.4) |
hl7:id
| II | 1 … 1 | R | | NHv2CDA |
@root
| oid | 1 … 1 | F | 2.16.840.1.113883.3.523.1.71 |
@extension
| st | 1 … 1 | R | PID-3.1 |
@assigningAuthorityName
| st | 1 … 1 | F | NHA MRN |
hl7:addr
| | 0 … * | | | NHv2CDA |
@use
| set_cs | 1 … 1 | R | Based on PID-11.7
If PID-11.7 = "Home" then "H" If PID-11.7 = "Mailing" then "PST" If PID-11.7 = "Alternate" then "TMP"
|
| CONF | |
hl7:city
| ST | 0 … 1 | R | PID-11.3 | NHv2CDA |
hl7:state
| ST | 0 … 1 | R | Based on PID-11.4
"CA-BC" if PID-11.4 = "BC - British Columbia"
| NHv2CDA |
hl7:postalCode
| ST | 0 … 1 | R | PID-11.5 | NHv2CDA |
hl7:country
| ST | 0 … 1 | R | Based on PID-11.6
"CA" if PID-11.6 = "Canada"
| NHv2CDA |
hl7:telecom
| TEL | 0 … * | | | NHv2CDA |
Choice | 1 … 1 | | Elements to choose from: |
Included | 1 … 1 | R | from 2.16.840.1.113883.3.1937.99.61.21.10.49 Canadian Realm Telecom (TEL.PHONE) (DYNAMIC) |
@use
| cs | 1 … 1 | R | “use” property is required, may repeat up to three times and is restricted to the list of values found in the Terminology Worksheet, x_BasicTelecommunicationAddressUse value set. Additional guidance for DIR: to be used for immediate direct communications between providers (e.g. pharmacist to physician for potential medication interaction issues).
|
| CONF | |
@xsi:type
| cs | 0 … 1 | F | TEL |
@specializationType
| cs | 0 … 1 | F | TEL.PHONE |
@value
| cs | 1 … 1 | R | The “value” property is mandatory and must follow the specifications as described in http://www.ietf.org/rfc/rfc3966.txt. The maximum length is 40 characters. Note: 1. No constraints have been applied to the content to restrict it to Canadian country codes AND 2. No constraints have been applied to the format. Best practice is to always include country code and area code when known. The telecommunication schemes supported are restricted to the list of values found in the Terminology Worksheet, x_PhoneURLScheme value set. (tel, fax) |
@nullFlavor
| cs | 0 … 1 | | |
hl7:useablePeriod
| SXCM_TS | 1 … 1 | R | | CanaHONE |
| Constraint | The “useablePeriod” property is not permitted.
|
Included | 1 … 1 | R | from 2.16.840.1.113883.3.1937.99.61.21.10.50 Canadian Realm Telecom(TEL.EMAIL) (DYNAMIC) |
@use
| cs | 1 … 1 | R | “use” property is required, may repeat up to three times and is restricted to the list of values found in the Terminology Worksheet, x_BasicEmailAddressUse value set The “value” property is mandatory and has a maximum length of 128 characters. |
| CONF | |
@xsi:type
| cs | 0 … 1 | F | TEL |
@specializationType
| cs | 0 … 1 | F | TEL.EMAIL |
@value
| cs | 1 … 1 | R | The “value” property is mandatory and has a maximum length of 128 characters. The telecommunication scheme supported is “mailto” (Mail to) |
@nullFlavor
| cs | 0 … 1 | | |
hl7:useablePeriod
| SXCM_TS | 1 … 1 | R | | CanaMAIL |
| Constraint | The “useablePeriod” property is not permitted.
|
hl7:patient
| | 1 … 1 | M | | NHv2CDA |
@classCode
| cs | 1 … 1 | F | PSN |
@determinerCode
| cs | 1 … 1 | F | INSTANCE |
hl7:name
| PN.CA | 1 … * | M | | NHv2CDA |
@use
| set_cs | 1 … 1 | R | |
hl7:administrativeGenderCode
| CE (required) | 1 … 1 | R | | NHv2CDA |
hl7:birthTime
| TS | 1 … 1 | R | | NHv2CDA |
hl7:languageCommunication
| | 0 … * | | | NHv2CDA |
hl7:languageCode
| CS | 0 … 1 | R | | NHv2CDA |