Template

Show index

Template Laboratory Battery Organizer - Antibiogram 2020‑06‑26

Id2.16.756.5.30.1.1.10.4.87Effective Date2020‑06‑26
Statusactive ActiveVersion Label2020
Namecdachlrep_entry_LaboratoryBatteryOrganizerAntibiogramDisplay NameLaboratory Battery Organizer - Antibiogram
DescriptionCoding of an antibiogram.
ContextParent nodes of template element with id 2.16.756.5.30.1.1.10.4.87
LabelCDA‑CH‑LREP
ClassificationCDA Entry Level Template
Open/ClosedOpen (other than defined elements are allowed)
Used by / Uses
Used by 1 transaction and 5 templates, Uses 12 templates
Used by as NameVersion
2.16.756.5.30.1.1.1.1.3.9.77.1.4.2Transactionpending CDA-CH-LREP - General Laboratory Report (2018)2018‑03‑06 18:38:46
2.16.756.5.30.1.1.10.1.10linkactive General Laboratory Report (2020)2020‑06‑26
2.16.756.5.30.1.1.10.3.76linkactive Laboratory Report Item Section - coded (2020)2020‑06‑26
2.16.756.5.30.1.1.10.3.77linkactive Laboratory Speciality Section - coded (2020)2020‑06‑26
2.16.756.5.30.1.1.10.4.85Containmentactive Laboratory Isolate Organizer - Pathogen Detection (2020)2020‑06‑26
2.16.756.5.30.1.1.10.4.118linkactive Laboratory Report Data Processing Entry (2020)2020‑06‑26
Uses as NameVersion
2.16.756.5.30.1.1.10.4.2Containmentactive Annotation Comments (2016)DYNAMIC
2.16.756.5.30.1.1.10.4.3Containmentactive Laboratory Observation (2020)DYNAMIC
2.16.756.5.30.1.1.10.4.5Containmentactive Non-Human Subject - subject Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.6Containmentactive Human Patient with Non-Human Subject - subject Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.7Containmentactive Laboratory Performer - performer Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.8Containmentactive Laboratory Results Validator - participant Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.9Containmentactive Responsible Party - participant Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.10Containmentactive Device - participant Containment (2020)DYNAMIC
2.16.756.5.30.1.1.10.4.11Containmentactive Specimen Collection (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.18Containmentactive Multimedia Embedded Content (2020)DYNAMIC
2.16.756.5.30.1.1.10.4.29Containmentactive External document (2017)DYNAMIC
2.16.756.5.30.1.1.10.9.16Containmentactive Author Compilation with name, addr and telecom (2020)DYNAMIC
RelationshipSpecialization: template 2.16.840.1.113883.10.12.305 CDA Organizer (2005‑09‑07)
ref
ad1bbr-

Specialization: template 1.3.6.1.4.1.19376.1.3.1.4 Laboratory Battery Organizer (DYNAMIC)
ref
XDLAB-
Example
Example
<organizer classCode="BATTERY" moodCode="EVN">
  <templateId root="2.16.756.5.30.1.1.10.4.87"/>  <templateId root="2.16.756.5.30.1.1.10.4.19"/>  <templateId root="1.3.6.1.4.1.19376.1.3.1.4"/>  <code code="29576-6" codeSystem="2.16.840.1.113883.6.1" codeSystemName="LOINC" displayName="Bacterial susceptibility panel"/>  <text>
    <reference value="#nartext1"/>  </text>  <statusCode code="completed"/>  <effectiveTime value="20180311201728+01:00"/>  <component typeCode="COMP">
    <observation classCode="OBS" moodCode="EVN">
      <templateId root="1.3.6.1.4.1.19376.1.3.1.6"/>      <code code="18861-5" codeSystem="2.16.840.1.113883.6.1" codeSystemName="LOINC" displayName="Amoxicillin [Susceptibility]"/>      <text>
        <reference value="#nartext1"/>      </text>      <statusCode code="completed"/>      <effectiveTime value="20180311202253"/>      <value type="PQ" unit="mg/dL" value="2.0"/>      <interpretationCode code="R" codeSystem="2.16.840.1.113883.5.83"/>    </observation>  </component></organizer>
ItemDTCardConfDescriptionLabel
hl7:organizer
Coding of an antibiogram. This organizer MUST be placed as a component within a Pathogen Detection Laboratory Isolate Organizer.CDA‑dotsLREP
@classCode
cs1 … 1FBATTERY
@moodCode
cs1 … 1FEVN
hl7:templateId
II1 … 1MCDA‑dotsLREP
@root
uid1 … 1F2.16.756.5.30.1.1.10.4.87
hl7:templateId
II1 … 1MCDA‑dotsLREP
@root
uid1 … 1F2.16.756.5.30.1.1.10.4.19
hl7:templateId
II1 … 1MCDA‑dotsLREP
@root
uid1 … 1F1.3.6.1.4.1.19376.1.3.1.4
hl7:id
II0 … 1An ID for this item MAY be filled for traceability.CDA‑dotsLREP
@root
uid1 … 1RMUST contain the OID of the system that issued the ID. OIDs of code systems, which are published in the public OID registry for the Swiss health care system (oid.refdata.ch) are REQUIRED. Others are NOT ALLOWED.
@extension
st0 … 1 Contains the ID itself. The ID MUST be unique within the system that issued the ID.
hl7:code
CD0 … 1The antibiogram MUST be declared using the LOINC code 29576-6 "Bacterial susceptibility panel".CDA‑dotsLREP
@code
cs1 … 1F29576-6
@codeSystem
oid1 … 1F2.16.840.1.113883.6.1
@codeSystemName
st1 … 1FLOINC
@displayName
st1 … 1FBacterial susceptibility panel
hl7:statusCode
CS1 … 1M

The status 'completed' means that all expected results for this results group are present and in a final state.

The status 'aborted' means that the examinations had to be aborted. Some results MAY be available.

CDA‑dotsLREP
 CONF
The value of @code shall be drawn from value set 1.3.6.1.4.1.19376.1.3.11.2 ActStatusAbortedCompleted (DYNAMIC)
hl7:effectiveTime
IVL_TS.CH.TZ1 … 1RTimestamp or period of findings (physiologically relevant period) for all results in this result group.CDA‑dotsLREP
@value
TS.CH.TZ0 … 1 Timestamp. Accuracy of the value: Date and time with hour and minute. If it is not known, nullFavor='UNK' must be used.
hl7:low
TS.CH.TZ0 … 1Start of the period. Accuracy of the value: Date and time with hour and minute. If it is not known, nullFavor='UNK' must be used.CDA‑dotsLREP
 Schematron assertrolered error 
 teststring-length(@value)>11 
 MessageA precision of date and time of day with at least hour and minute is required. 
hl7:high
TS.CH.TZ0 … 1End of the period. Accuracy of the value: Date and time with hour and minute. If it is not known, nullFavor='UNK' must be used.CDA‑dotsLREP
 Schematron assertrolered error 
 teststring-length(@value)>11 
 MessageA precision of date and time of day with at least hour and minute is required. 
 Schematron assertrolered error 
 test@nullFlavor='UNK' or @value or (hl7:low and hl7:high) 
 MessageEither the imestamp or the period of the findings MUST be declared. If it is not known, nullFavor='UNK' must be used. 
Choice0 … 1
IF this result group is based on a specimen of a non-human material, the subject element MUST be declared.
Elements to choose from:
hl7:subject
0 … 1Contains 2.16.756.5.30.1.1.10.4.5 Non-Human Subject - subject Containment (DYNAMIC)CDA‑dotsLREP
hl7:subject
0 … 1Contains 2.16.756.5.30.1.1.10.4.6 Human Patient with Non-Human Subject - subject Containment (DYNAMIC)CDA‑dotsLREP
hl7:performer
0 … *This CAN be used to indicate who has performed the test. This information supersedes any information recorded at higher level.
Contains 2.16.756.5.30.1.1.10.4.7 Laboratory Performer - performer Containment (DYNAMIC)		CDA‑dotsLREP
hl7:author
0 … *This CAN be used to indicate who has documented the result. This information supersedes any information recorded at higher level.
Contains 2.16.756.5.30.1.1.10.9.16 Author Compilation with name, addr and telecom (DYNAMIC)		CDA‑dotsLREP
Choice0 … *
This CAN be used to identify other parties:
  • Who has verified the result (AUTHEN).
  • Which external laboratory has delivered the result (RESP).
  • Which device (analyzer) was used to determine the result (DEV).
Elements to choose from:
hl7:participant
0 … *Who has verified the result (AUTHEN). This information supersedes any information recorded at higher level.
Contains 2.16.756.5.30.1.1.10.4.8 Laboratory Results Validator - participant Containment (DYNAMIC)		CDA‑dotsLREP
hl7:participant
0 … *Which external laboratory has delivered the result (RESP). This information supersedes any information recorded at higher level.
Contains 2.16.756.5.30.1.1.10.4.9 Responsible Party - participant Containment (DYNAMIC)		CDA‑dotsLREP
hl7:participant
0 … *Which device (analyzer) was used to determine the result (DEV). This information supersedes any information recorded at higher level.
Contains 2.16.756.5.30.1.1.10.4.10 Device - participant Containment (DYNAMIC)		CDA‑dotsLREP
Choice0 … *
For "Laboratory Observation" coding, use the filter 'property:susc class:abxbact' on search.loinc.org (see https://search.loinc.org/searchLOINC/search.zul?query=property%3Asusc+class%3Aabxbact).
Elements to choose from:
hl7:component
0 … *For observation coding, use the filter 'property:susc class:abxbact' on search.loinc.org (see https://search.loinc.org/searchLOINC/search.zul?query=property%3Asusc+class%3Aabxbact).
Contains 2.16.756.5.30.1.1.10.4.3 Laboratory Observation (DYNAMIC)		CDA‑dotsLREP
@typeCode
cs1 … 1FCOMP
hl7:component
0 … *Contains 2.16.756.5.30.1.1.10.4.11 Specimen Collection (DYNAMIC)CDA‑dotsLREP
@typeCode
cs1 … 1FCOMP
hl7:component
0 … *Contains 2.16.756.5.30.1.1.10.4.18 Multimedia Embedded Content (DYNAMIC)CDA‑dotsLREP
@typeCode
cs1 … 1FCOMP
hl7:component
0 … *Contains 2.16.756.5.30.1.1.10.4.2 Annotation Comments (DYNAMIC)CDA‑dotsLREP
@typeCode
cs1 … 1FCOMP
hl7:reference
0 … *This CAN be used to make reference to an external document.
Contains 2.16.756.5.30.1.1.10.4.29 External document (DYNAMIC)		CDA‑dotsLREP
@typeCode
cs1 … 1FREFR
 Schematron assertrolered error 
 testancestor::hl7:templateId[@root='2.16.756.5.30.1.1.10.4.85'] 
 MessageThe antibiogram must be placed in a Pathogen Detection Laboratory Isolate Organizer.