Template

Show index

Template Specimen Collection 2019‑08‑20

Id2.16.756.5.30.1.1.10.4.11
ref
ch-palm-
Effective Date2019‑08‑20
Statusactive ActiveVersion Label2019
Namechpalm_entry_SpecimenCollectionDisplay NameSpecimen Collection
DescriptionLaboratory reports MAY contain information on the specimen. If there are more than one specimen associated to the order, then this item occurs multiple times.
ContextParent nodes of template element with id 2.16.756.5.30.1.1.10.4.11
LabelIHE PalM TF3 Rev.10, 6.3.4.5
ClassificationCDA Entry Level Template
Open/ClosedOpen (other than defined elements are allowed)
Used by / Uses
Used by 3 transactions and 12 templates, Uses 5 templates
Used by as NameVersion
2.16.756.5.30.1.127.77.1.4.5Transactionpending CDA-CH-VACD - Immunization Recommendation Request (2018)2018‑04‑10 18:08:44
2.16.756.5.30.1.127.77.1.4.6Transactionpending CDA-CH-VACD - Immunization Recommendation Response (2018)2018‑04‑10 18:09:59
2.16.756.5.30.1.127.77.1.4.7Transactionpending CDA-CH-VACD - Vaccination Record (2018)2018‑04‑10 18:10:49
2.16.756.5.30.1.1.10.1.17linkactive Immunization Recommendation Request (2020)2020‑06‑26
2.16.756.5.30.1.1.10.1.18linkactive Immunization Recommendation Response (2020)2020‑06‑26
2.16.756.5.30.1.1.10.1.19linkactive Vaccination Record (2020)2020‑06‑26
2.16.756.5.30.1.1.10.3.3linkactive Laboratory Speciality Section - coded (2019)2019‑08‑20
2.16.756.5.30.1.1.10.3.5linkactive Laboratory Report Item Section - coded (2019)2019‑08‑20
2.16.756.5.30.1.1.10.4.4Containmentactive Laboratory Report Data Processing Entry (2019)2019‑08‑20
2.16.756.5.30.1.1.10.4.11linkactive Specimen Collection (2019)2019‑08‑20
2.16.756.5.30.1.1.10.4.17linkactive Laboratory Isolate Organizer (2019)2019‑08‑20
2.16.756.5.30.1.1.10.4.19Containmentactive Laboratory Battery Organizer (2019)2019‑08‑20
2.16.756.5.30.1.1.10.4.85Containmentactive Laboratory Isolate Organizer - Pathogen Detection (2020)2020‑06‑26
2.16.756.5.30.1.1.10.4.87Containmentactive Laboratory Battery Organizer - Antibiogram (2020)2020‑06‑26
2.16.756.5.30.1.1.10.4.118Containmentactive Laboratory Report Data Processing Entry (2020)2020‑06‑26
Uses as NameVersion
2.16.756.5.30.1.1.10.4.3Containmentactive Laboratory Observation (2020)DYNAMIC
2.16.756.5.30.1.1.10.4.7Containmentactive Laboratory Performer - performer Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.12Containmentactive Specimen Received (2019)DYNAMIC
2.16.756.5.30.1.1.10.4.24Containmentactive Specimen collection - participant Containment (2019)DYNAMIC
2.16.756.5.30.1.1.10.9.14Includedraft Narrative Text Reference (2021)DYNAMIC
RelationshipSpecialization: template 2.16.840.1.113883.10.12.306 CDA Procedure (2005‑09‑07)
ref
ad1bbr-

Specialization: template 1.3.6.1.4.1.19376.1.3.1.2 Specimen Collection (DYNAMIC)
ref
XDLAB-
Example
Example
<procedure classCode="PROC" moodCode="EVN">
  <templateId root="2.16.756.5.30.1.1.10.4.11"/>  <templateId root="1.3.6.1.4.1.19376.1.3.1.2"/>  <id root="2.999" extension="your id"/>  <code code="33882-2" codeSystem="2.16.840.1.113883.6.1" codeSystemName="LOINC" displayName="Collection date of Unspecified specimen"/>  <!-- include template 2.16.756.5.30.1.1.10.9.14 'Narrative text reference' -->
  <effectiveTime nullFlavor="UNK">
    <low value="20180320171934+0100"/>  </effectiveTime>
  <targetSiteCode displayName="displayName" codeSystemName="ActSite" codeSystem="2.16.840.1.113883.5.1052" code="cs"/>  <performer>
    <!-- template 2.16.756.5.30.1.1.10.4.7 'Laboratory Performer - performer Containment' -->
  </performer>
  <participant>
    <!-- template 2.16.756.5.30.1.1.10.4.24 'Specimen collection - participant Containment' -->
  </participant>
  <entryRelationship typeCode="COMP">
    <!-- template 2.16.756.5.30.1.1.10.4.12 'Specimen Received' -->
  </entryRelationship>
  <entryRelationship typeCode="COMP">
    <!-- template 2.16.756.5.30.1.1.10.4.3 'Laboratory Observation' -->
  </entryRelationship>
</procedure>
ItemDTCardConfDescriptionLabel
hl7:procedure
IHE PalM TF3 Rev.10, 6.3.4.5
@classCode
cs1 … 1FPROC
@moodCode
cs1 … 1FEVN
hl7:templateId
II1 … 1MIHE PalM TF3 Rev.10, 6.3.4.5
@root
uid1 … 1F2.16.756.5.30.1.1.10.4.11
hl7:templateId
II1 … 1MIHE PalM TF3 Rev.10, 6.3.4.5
@root
uid1 … 1F1.3.6.1.4.1.19376.1.3.1.2
hl7:id
II0 … 1An ID for this item MAY be filled for traceability.IHE PalM TF3 Rev.10, 6.3.4.5
@root
uid1 … 1RMUST contain the OID of the system that issued the ID. OIDs of code systems, which are published in the public OID registry for the Swiss health care system (oid.refdata.ch) are REQUIRED. Others are NOT ALLOWED.
@extension
st0 … 1 Contains the ID itself. The ID MUST be unique within the system that issued the ID.
hl7:code
CD1 … 1MLOINC specimen collection code.IHE PalM TF3 Rev.10, 6.3.4.5
@code
cs1 … 1F33882-2
@codeSystem
oid1 … 1F2.16.840.1.113883.6.1
@codeSystemName
st1 … 1FLOINC
@displayName
st1 … 1FCollection date of Unspecified specimen
Included1 … 1 from 2.16.756.5.30.1.1.10.9.14 Narrative Text Reference (DYNAMIC)
The human-readable text MUST be generated automatically from the structured information of this element. The text element MUST contain the reference to the corresponding text in the human readable part, ONLY.
hl7:text
ED1 … 1MCDA‑CH V2
hl7:reference
TEL1 … 1MThe reference to the corresponding text in the human readable part must be specified by reference to content[@ID]: reference[@value='#xxx']CDA‑CH V2
@value
1 … 1RReference to the narrative part of the section in the format '#xxx', where xxx is the ID of the corresponding element.
 Schematron assertrolered error 
 teststarts-with(@value,'#') 
 MessageThe @value attribute content MUST conform to the format '#xxx', where xxx is the ID of the corresponding 'content' element. 
 Variable letNameidvalue 
 Valuesubstring-after(@value,'#') 
 Schematron assertrolered error 
 testancestor::hl7:structuredBody//*[@ID=$idvalue] 
 MessageNo narrative text found for this reference (no content element within this document has an ID that corresponds to '<value-of select="$idvalue"/>'). 
hl7:effectiveTime
IVL_TS.CH.TZ1 … 1 Timestamp (e.g., for simple blood sampling) or period (e.g., 24 hour urine test) of the specimen collection or specimen creation.
  • Timestamp: Is declared using @value. Minimum accuracy of the value: Date (the time of the day is OPTIONAL).
  • Period: Is declared using low/@value and high/@value. Accuracy of the value: Date and time with hour and minute.
IHE PalM TF3 Rev.10, 6.3.4.5
@nullFlavor
cs0 … 1FUNK
 If the moment in time of the sampling is not known, nullFlavor='UNK' MUST be used.
@value
TS.CH.TZ0 … 1 Timestamp. Accuracy of the value: Date and time with hour and minute. If it is not known, nullFavor='UNK' must be used.
hl7:low
TS.CH.TZ0 … 1Start of the period. Accuracy of the value: Date and time with hour and minute. If it is not known, nullFavor='UNK' must be used.IHE PalM TF3 Rev.10, 6.3.4.5
 Schematron assertrolered error 
 teststring-length(@value)>11 
 MessageA precision of date and time of day with at least hour and minute is required. 
hl7:high
TS.CH.TZ0 … 1End of the period. Accuracy of the value: Date and time with hour and minute. If it is not known, nullFavor='UNK' must be used.IHE PalM TF3 Rev.10, 6.3.4.5
 Schematron assertrolered error 
 teststring-length(@value)>11 
 MessageA precision of date and time of day with at least hour and minute is required. 
 Schematron assertrolered error 
 test(@nullFlavor='UNK') or (string-length(@value)>7) or ((hl7:low/@nullFlavor='UNK' or string-length(hl7:low/@value)>7) and (hl7:high/@nullFlavor='UNK' or string-length(hl7:high/@value)>7)) 
 MessageA precision of day is required. 
hl7:targetSiteCode
CD0 … 1 This CAN be used to indicate the anatomical position of the specimen collection. This is particularly relevant in microbiology (e.g., when the sample was removed with a swab from the left foot). The HL7 vocabulary ActSite contains anatomical locations of organisms that may be at the center of the action. IHE PalM TF3 Rev.10, 6.3.4.5
@code
cs1 … 1RThe code MUST be specified.
@codeSystem
oid1 … 1F2.16.840.1.113883.5.1052
@codeSystemName
st1 … 1FActSite
@displayName
st1 … 1RThe displayName of the code MUST be specified for tracking purposes. However, processing is NOT ALLOWED. Instead, a processing system is to display a user readable language translation of the code from the value set.
hl7:performer
0 … 1This can be used to specify who performed the specimen collection.
Contains 2.16.756.5.30.1.1.10.4.7 Laboratory Performer - performer Containment (DYNAMIC)
IHE PalM TF3 Rev.10, 6.3.4.5
hl7:participant
1 … 1MThe information on the specimen MUST be declared.
Contains 2.16.756.5.30.1.1.10.4.24 Specimen collection - participant Containment (DYNAMIC)
IHE PalM TF3 Rev.10, 6.3.4.5
hl7:entryRelationship
0 … 1This MAY be used to indicate when the sample has arrived at the laboratory.
Contains 2.16.756.5.30.1.1.10.4.12 Specimen Received (DYNAMIC)
IHE PalM TF3 Rev.10, 6.3.4.5
@typeCode
cs1 … 1FCOMP
hl7:entryRelationship
0 … * This MAY be used to indicate observations of the specimen collection. This allows to provide information to the laboratory, that are important e.g. for a 24-hour urine test:
  • Collection period for 24 hour urine test: @code='13362-9' (Collection duration of Urine), @value='24', @unit='h'
  • Collected volume (urine quantity): @code='19153-6' (Volume in Urine collected for unspecified duration), @value: urine quantity, @unit: UCUM unit of urine quantity (e.g. ml, dl or l)

Contains 2.16.756.5.30.1.1.10.4.3 Laboratory Observation (DYNAMIC)
IHE PalM TF3 Rev.10, 6.3.4.5
@typeCode
cs1 … 1FCOMP