| Item | DT | Card | Conf | Description | Label |
|---|
hl7:act
| | | | | CDA‑ SMCP |
@classCode
| cs | 1 … 1 | F | ACT |
@moodCode
| cs | 1 … 1 | R | In intent mood (moodCode='INT') this is how the estimated time of departure or arrival is indicated. In event mood (moodCode='EVN') this is how the actual departure or arrival of the patient is recorded. |
| | CONF | | @moodCode shall be "INT" | | or | | @moodCode shall be "EVN" |
|
hl7:templateId
| II | 1 … 1 | M | | CDA‑SMCP |
@root
| uid | 1 … 1 | F | 2.16.756.5.30.1.1.10.4.110 |
hl7:templateId
| II | 1 … 1 | M | | CDA‑SMCP |
@root
| uid | 1 … 1 | F | 2.16.756.5.30.1.1.10.4.77 |
hl7:templateId
| II | 1 … 1 | M | | CDA‑SMCP |
@root
| uid | 1 … 1 | F | 1.3.6.1.4.1.19376.1.5.3.1.1.10.4.1 | 6.3..1.2 |
hl7:id
| II | 1 … * | M | The entry must have an identifier | CDA‑SMCP |
hl7:code
| CD | 1 … 1 | M | The code describes the intended mode of transport. For transport between facilities, IHE recommends the use of a code system based on the DEEDS Mode of Transportation data element value set. However, the vocabulary used within an affinity domain should be determined by a policy agreement within the domain. | 6.3..1.4 |
@code
| cs | 1 … 1 | R | |
@codeSystem
| oid | 1 … 1 | F | 2.16.840.1.113883.6.102.4.2 |
@codeSystemName
| st | 1 … 1 | F | DEEDS4.02 |
@displayName
| st | 1 … 1 | R | |
| Included | 0 … 1 | C | from 2.16.756.5.30.1.1.10.9.49 Original Text Reference (DYNAMIC)
The human-readable text MUST be generated automatically from the structured information of this element. The text element MUST contain the reference to the corresponding text in the human readable part, ONLY. |
hl7:originalText
| ED | 0 … 1 | C | | CDA‑CH V2 |
hl7:reference
| TEL | 1 … 1 | M | The reference to the corresponding text in the human readable part must be specified by reference to content[@ID]: reference[@value='#xxx'] | CDA‑CH V2 |
@value
| | 1 … 1 | R | Reference to the narrative part of the section in the format '#xxx', where xxx is the ID of the corresponding element. |
| | Schematron assert | role |  error | |
| | test | starts-with(@value,'#') | |
| | Message | The @value attribute content MUST conform to the format '#xxx', where xxx is the ID of the corresponding 'content' element. | |
| | Variable let | Name | idvalue | |
| | Value | substring-after(@value,'#') | |
| | Schematron assert | role | error | |
| | test | ancestor::hl7:structuredBody//*[@ID=$idvalue] | |
| | Message | No narrative text found for this reference (no content element within this document has an ID that corresponds to '<value-of select="$idvalue"/>'). | |
| | Schematron assert | role | error | |
| | test | parent::*/text()=ancestor::hl7:structuredBody//*[@ID=$idvalue]/text() | |
| | Message | The originalText content MUST be identical to the narrative text for this reference. | |
hl7:text
| ED | 1 … 1 | | | CDA‑SMCP |
hl7:reference
| TEL | 1 … 1 | M | This is a reference to the narrative text corresponding to the transport act. | CDA‑SMCP |
@value
| | 1 … 1 | R | Reference to the narrative part of the section in the format '#xxx', where xxx is the ID of the corresponding element. |
hl7:effectiveTime
| IVL_TS | 1 … 1 | M | The effectiveTime element shall be sent. It records the interval of time over which transport occurs. Either low value or high value or both values SHALL be specified. | CDA‑SMCP |
| | |
hl7:low
| IVXB_TS | 1 … 1 | R | This element records the time of departure. If unknown, it must be recorded using a flavor of null. This element shall be sent using the TS data type, as shown above. | CDA‑SMCP |
hl7:high
| IVXB_TS | 1 … 1 | R | This element records the time of arrival. If unknown, it must be recorded using a flavor of null. This element shall be sent using the TS data type as shown above. | CDA‑SMCP |
hl7:performer
| | 0 … * | | This CAN be used to indicate who has performed the transport.
Contains 2.16.756.5.30.1.1.10.4.111 Performer (DYNAMIC) | CDA‑SMCP |
| | |
Draft