| Item | DT | Kard | Konf | Beschreibung | Label |
|---|
hl7:substanceAdministration
| | 1 … 1 | R | | UVSu tion |
@classCode
| cs | 1 … 1 | F | SBADM |
@moodCode
| cs | 1 … 1 | R |  If the subordinate substance administration refers to Medication Order then a substance administration request (moodCode is 'RQO') is used.
If it refers to a Medication Statement, the moodCode shall be set to event/intent (moodCode is 'EVN' or 'INT'). |
| | CONF | |
| | Constraint | The moodCode of this subordinate substance administration SHALL be the same of the parent substance administration |
hl7:templateId
| II | 1 … 1 | M | | UVSution |
@root
| uid | 1 … 1 | F | 2.16.840.1.113883.10.21.4.6 |
hl7:statusCode
| CS | 1 … 1 | M | | UVSution |
| | Constraint | The statusCode of this subordinate substance administration SHALL be the same of that of the parent substance administration. |
| | CONF | | Der Wert von @code muss gewählt werden aus dem Value Set 2.16.840.1.113883.11.21.2 ActStatusActiveCompletedAbortedSuspended (DYNAMIC) |
|
| Auswahl | 1 … 1 | | Elemente in der Auswahl:- hl7:effectiveTime[@value or @nullFlavor]
- hl7:effectiveTime[@xsi:type='PIVL_TS']
- hl7:effectiveTime[@xsi:type='EIVL_TS']
- hl7:effectiveTime[@xsi:type='SXPR_TS']
|
hl7:effectiveTime
| TS | 0 … 1 | C | This required element describes the frequency of intakes. If not known it shall be valued with the nullflavor "UNK" | UVSution |
| wo [@value or @nullFlavor] | |
| | Beispiel | Once (known date) <effectiveTime value="20170404"/> |
| | Beispiel | Unknown <effectiveTime nullFlavor="UNK"/> |
hl7:effectiveTime
| PIVL_TS | 0 … 1 | C | Periodic Time Interval | UVSution |
| wo [@xsi:type='PIVL_TS'] | |
| | Beispiel | Every 4 hours <effectiveTime xsi:type="PIVL_TS" institutionSpecified="false">
<period value="4" unit="h"/></effectiveTime> |
| | Beispiel | Twice a day <effectiveTime xsi:type="PIVL_TS" institutionSpecified="true">
<period value="12" unit="h"/></effectiveTime> |
hl7:effectiveTime
| EIVL_TS | 0 … 1 | C | Event Related Time Interval | UVSution |
| wo [@xsi:type='EIVL_TS'] | |
| | Beispiel | After meal <effectiveTime xsi:type="EIVL_TS">
<event code="PC" codeSystem="2.16.840.1.113883.5.139"/></effectiveTime> |
| | Beispiel | One hour before breakfast <effectiveTime xsi:type="EIVL_TS">
<event code="ACM" codeSystem="2.16.840.1.113883.5.139"/> <offset>
<low value="1" unit="h"/> </offset></effectiveTime> |
hl7:event
| EIVL.event | 0 … 1 | C | | UVSution |
@code
| cs | 0 … 1 | | |
| | CONF | |
hl7:effectiveTime
| SXPR_TS | 0 … 1 | R | Combined Time Interval | UVSution |
| wo [@xsi:type='SXPR_TS'] | |
hl7:doseQuantity
| IVL_PQ | 0 … 1 | R | The doseQuantity describes the amount of the medication given (the dosage).
If a dose range is given (e.g., 1-2 tablets, or 325-750mg), then the <low> and <high> bounds are specified in their respective elements; otherwise only one physical quantity is specified (e.g. 2 drops)
The dose can be in some known and measurable unit, such as grams, milligrams,or described in "administration" units (unit of presentation, such as capsules).
If the dose is in countable items (tablets, caplets, "eaches"), then the unit could be omitted or valorized using the UCUM annotations for describing the type of countable items (e.g. .{tablet}, {puff},..).
The unit attribute – when expresses unit of measures- shall be derived from the UCUM code system.
The used elements should contain a <translation> element that provides a reference to the originalText found in the narrative body of the document. | UVSution |
@unit
| cs | 0 … 1 | | |
| | Beispiel | Not pre-coordinated consumable <doseQuantity value="25" unit="mg"/> |
| | Beispiel | Pre-coordinated consumable - Dose Range <doseQuantity>
<low value="1" unit="{tablet}"/> <high value="2" unit="{tablet}"/></doseQuantity> |
| | Beispiel | Pre-coordinated consumable <doseQuantity value="2" unit="{puff}"/> |
| | Beispiel | Pre-coordinated consumable with text reference <doseQuantity value="2" unit="{puff}">
<translation nullFlavor="NI">
<originalText>
<reference value="#text-ref-1"/> </originalText> </translation></doseQuantity> |
| | Beispiel | Textual dosage <doseQuantity nullFlavor="NI">
<translation nullFlavor="NI">
<originalText>
<reference value="#text-ref-1"/> </originalText> </translation></doseQuantity> |
hl7:rateQuantity
| IVL_PQ | 0 … 1 | | | UVSution |
hl7:maxDoseQuantity
| RTO_PQ_PQ | 0 … 1 | | | UVSution |
hl7:administrationUnitCode
| CE | 0 … 1 | | | UVSution |
| | CONF | |
hl7:consumable
| | 1 … 1 | R | | UVSution |
hl7:manufacturedProduct
| | 1 … 1 | R | | UVSution |
hl7:manufacturedMaterial
| | 1 … 1 | R | | UVSution |
@nullFlavor
| cs | 1 … 1 | F | NA |
Entwurf
Unter Revision vor der Publikation
XeH Medication Statement (1.0)