Item | DT | Card | Conf | Description | Label |
---|
hl7v2:PPN.1
| ST | 0 … 1 | | Coded ID according to a user-defined table, defined by the 8th component. If the first component is present, either the source table or the assigning authority must be valued. Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | ID Number |
hl7v2:PPN.2
| FN | 0 … 1 | | This component allows full specification of the surname of a person. Where appropriate, it differentiates the person's own surname from that of the person's partner or spouse, in cases where the person's name may contain elements from either name. It also permits messages to distinguish the surname prefix (such as "van" or "de") from the surname root. See section 2.A.30. Contains 2.16.840.1.113883.3.1937.777.10.15.26 FN - Family name (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | FN |
@LongName
| | 0 … 1 | F | Family Name |
hl7v2:PPN.3
| ST | 0 … 1 | | First name. Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | Given Name |
hl7v2:PPN.4
| ST | 0 … 1 | | Multiple middle names may be included by separating them with spaces. Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | Second and Further Given Names or Initials Thereof |
hl7v2:PPN.5
| ST | 0 … 1 | | Used to specify a name suffix (e.g., Jr. or III). Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | Suffix (e.g., JR or III) |
hl7v2:PPN.6
| ST | 0 … 1 | | Used to specify a name prefix (e.g., Dr.). Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | Prefix (e.g., DR) |
hl7v2:PPN.7
| IS | 0 … 1 | | Retained for backward compatibility only as of v 2.5. See Professional Suffix component. Used to specify an educational degree (e.g., MD). Refer to User-defined Table 0360 – Degree for suggested values. Contains 2.16.840.1.113883.3.1937.777.10.15.84 IS - Coded value for user-defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | IS |
@Table
| | 0 … 1 | F | HL70360 |
@LongName
| | 0 … 1 | F | Degree (e.g., MD) |
hl7v2:PPN.8
| IS | 0 … 1 | C | User-defined Table 0297 - CN ID source is used as the HL7 identifier for the user-defined table of values for this component. Used to delineate the first component. Contains 2.16.840.1.113883.3.1937.777.10.15.84 IS - Coded value for user-defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | IS |
@Table
| | 0 … 1 | F | HL70297 |
@LongName
| | 0 … 1 | F | Source Table |
| Constraint | Required if the first component has a value |
hl7v2:PPN.9
| HD | 0 … 1 | | The assigning authority is a unique identifier of the system (or organization or agency of department) that creates the data. It is a HD data type. User-defined Table 0363 – Assigning authority is used as the HL7 identifier for the user-defined table of values for the first sub-component of the HD component, <namespace ID> . Note: When the HD data type is used in a given segment as a component of a field of another data type, User-defined Table 0300 - Namespace ID (referenced by the first sub-component of the HD component) may be re-defined (given a different user-defined table number and name) by the technical committee responsible for that segment.
By site agreement, implementers may continue to use User-defined Table 0300 – Namespace ID for the first sub-component. The reader is referred to the PPN.23 and the PPN.24 if there is a need to transmit values with semantic meaning for an assigning jurisdiction or assigning department or agency in addition to, or instead of, an assigning authority. However, all 3 components may be valued. If, in so doing, it is discovered that the values in PPN.23 and/or PPN.24 conflict with PPN.94, the user would look to the Message Profile or other implementation agreement for a statement as to which takes precedence. Contains 2.16.840.1.113883.3.1937.777.10.15.28 HD - Hierarchic designator (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | HD |
@Table
| | 0 … 1 | F | HL70363 |
@LongName
| | 0 … 1 | F | Assigning Authority |
hl7v2:PPN.10
| ID | 0 … 1 | | A code that represents the type of name. Refer to HL7 Table 0200 - Name type for valid values (see Section 2.A.88, "XPN - extended person name"). Contains 2.16.840.1.113883.3.1937.777.10.15.83 ID - Coded value for HL7 defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ID |
@Table
| | 0 … 1 | F | HL70200 |
@LongName
| | 0 … 1 | F | Name Type Code |
hl7v2:PPN.11
| ST | 0 … 1 | | The check digit in this data type is not an add-on produced by the message processor. It is the check digit that is part of the identifying number used in the sending application. If the sending application does not include a self-generated check digit in the identifying number, this component should be valued null. Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | Identifier Check Digit |
hl7v2:PPN.12
| ID | 0 … 1 | | Contains the code identifying the check digit scheme employed. Refer to HL7 Table 0061 - Check digit scheme for valid values. Contains 2.16.840.1.113883.3.1937.777.10.15.83 ID - Coded value for HL7 defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ID |
@Table
| | 0 … 1 | F | HL70061 |
@LongName
| | 0 … 1 | F | Check Digit Scheme |
hl7v2:PPN.13
| ID | 0 … 1 | | A code corresponding to the type of identifier. In some cases, this code may be used as a qualifier to the "Assigning authority" component. Refer to HL7 Table 0203 - Identifier type for suggested values. Contains 2.16.840.1.113883.3.1937.777.10.15.83 ID - Coded value for HL7 defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ID |
@Table
| | 0 … 1 | F | HL70203 |
@LongName
| | 0 … 1 | F | Identifier Type Code |
hl7v2:PPN.14
| HD | 0 … 1 | | The place or location identifier where the identifier was first assigned to the patient. This component is not an inherent part of the identifier but rather part of the history of the identifier: as part of this data type, its existence is a convenience for certain intercommunicating systems. Note: When the HD data type is used in a given segment as a component of a field of another data type, User-defined Table 0300 - Namespace ID (referenced by the first sub-component of the HD component) may be re-defined (given a different user-defined table number and name) by the technical committee responsible for that segment. Contains 2.16.840.1.113883.3.1937.777.10.15.28 HD - Hierarchic designator (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | HD |
@LongName
| | 0 … 1 | F | Assigning Facility |
hl7v2:PPN.15
| TS | 0 … 1 | | This component describes when the activity was performed. Note: If this field is not null, both the performing person and the time stamp must be valued. Contains 2.16.840.1.113883.3.1937.777.10.15.64 TS - Time stamp (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | TS |
@LongName
| | 0 … 1 | F | Date/Time Action Performed |
hl7v2:PPN.16
| ID | 0 … 1 | | Different name/address types and representations of the same name/address should be described by repeating of this field, with different values of the Name/Address Type and/or Name/Address Representation component. Note: This new component remains in "alphabetic" representation with each repetition of the field using these data types. I.e. even though the name may be represented in an ideographic character set, this component will remain represented in an alphabetic character set. In general this component provides an indication of the representation provided by the data item. It does not necessarily specify the character sets used. Thus, even though the representation might provide an indication of what to expect, the sender is still free to encode the contents using whatever character set is desired. This component provides only hints for the receiver, so it can make choices regarding what it has been sent and what it is capable of displaying. Contains 2.16.840.1.113883.3.1937.777.10.15.83 ID - Coded value for HL7 defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ID |
@Table
| | 0 … 1 | F | HL70465 |
@LongName
| | 0 … 1 | F | Name Representation Code |
hl7v2:PPN.17
| CE | 0 … 1 | | This component is used to designate the context in which a name is used. The main use case is in Australian healthcare: indigenous patients who prefer to use different names when attending different healthcare institutions. Another use case occurs in the US where health practitioners can be licensed under slightly different names and the reporting of the correct name is vital for administrative purposes. Refer to chapter 3, section 3.4.2.6 for more detailed information on how to use this table. Refer to User-defined table 0448 – Name context for suggested values Contains 2.16.840.1.113883.3.1937.777.10.15.5 CE - Coded element (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | CE |
@Table
| | 0 … 1 | F | HL70448 |
@LongName
| | 0 … 1 | F | Name Context |
hl7v2:PPN.18
| DR | 0 … 1 | | This component contains the start and end date/times, which define the period during which this name was valid. See section 2.A.20, "DR - date/time range" for description of subcomponents. Retained for backward compatibility only as of v 2.5. Refer to PPN.20 Effective Date and PPN.21Expiration Date. This component cannot be fully expressed and was identified as v 2.4 erratum. Contains 2.16.840.1.113883.3.1937.777.10.15.18 DR - Date/time range (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | DR |
@LongName
| | 0 … 1 | F | Name Validity Range |
hl7v2:PPN.19
| ID | 0 … 1 | | A code that represents the preferred display order of the components of this person name. Refer to HL7 Table 0444 – Name assembly order for valid values. Contains 2.16.840.1.113883.3.1937.777.10.15.83 ID - Coded value for HL7 defined tables (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ID |
@Table
| | 0 … 1 | F | HL70444 |
@LongName
| | 0 … 1 | F | Name Assembly Order |
hl7v2:PPN.20
| TS | 0 … 1 | | The first date, if known, on which the address is valid and active. Contains 2.16.840.1.113883.3.1937.777.10.15.64 TS - Time stamp (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | TS |
@LongName
| | 0 … 1 | F | Effective Date |
hl7v2:PPN.21
| TS | 0 … 1 | | The last date, if known, on which the address is valid and active. Contains 2.16.840.1.113883.3.1937.777.10.15.64 TS - Time stamp (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | TS |
@LongName
| | 0 … 1 | F | Expiration Date |
hl7v2:PPN.22
| ST | 0 … 1 | | Used to specify an abbreviation, or a string of abbreviations, denoting qualifications that support the person’s profession, (e.g., licenses, certificates, degrees, affiliations with professional societies, etc.). The Professional Suffix normally follows the Family Name when the Person Name is used for display purposes. Please note that this component is an unformatted string and is used for display purposes only. Detailed information regarding the contents of Professional Suffix is obtained using appropriate segments in Chapter 15, Personnel Management. Contains 2.16.840.1.113883.3.1937.777.10.15.89 ST - String (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | ST |
@LongName
| | 0 … 1 | F | Professional Suffix |
hl7v2:PPN.23
| CWE | 0 … 1 | | The geo-political body that assigned the identifier in component 1. See section 2.A.14.9, "Assigning Jurisdiction (CWE)" for further detail. Contains 2.16.840.1.113883.3.1937.777.10.15.11 CWE - Coded with exceptions (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | CWE |
@LongName
| | 0 … 1 | F | Assigning Jurisdiction |
hl7v2:PPN.24
| CWE | 0 … 1 | | The agency or department that assigned the identifier in component 1. See section 2.A.14.10, "Assigning Agency or Department (CWE)" for further details. Contains 2.16.840.1.113883.3.1937.777.10.15.11 CWE - Coded with exceptions (DYNAMIC) | PPN_type |
@Type
| | 0 … 1 | F | CWE |
@LongName
| | 0 … 1 | F | Assigning Agency or Department |