Item | DT | Card | Conf | Description | Label |
---|
hl7:manufacturedMaterial
| | 0 … * | R | | epSOrial |
@classCode
| cs | 1 … 1 | F | MMAT |
@determinerCode
| cs | 1 … 1 | F | KIND |
hl7:code
| CE.EPSOS | 0 … 1 | R | The <code> element of the <manufacturedMaterial> describes the medication. For the scope of epSOS this is used to convey the “Country A Cross-border/regional/national medicinal product code.
In a CDA document, the <originalText> shall contain a <reference> whose URI value points to the generic name and strength of the medication in the narrative, or just the generic name alone if strength is not relevant.
Note: When the text is supplied from the narrative, the implication is that if the components of a combination medication are supplied in an entry, these must also be displayed in narrative text; the combination medication will not be able to be broken down into its component parts. This is entirely consistent with the CDA Release 2.0 requirements that the narrative supply the necessary and relevant human readable information content.
| epSOrial |
| |
hl7:name
| EN | 0 … 1 | R | In an epSOS ePrescriprion or eDispensation document, the element should contain the brand name of the medication. | epSOrial |
| |
epsos:desc
| EN | 0 … 1 | R | Free-text representation of the strength. | epSOrial |
| Example | <epsos:desc>20/12,5 mg</epsos:desc> |
epsos:formCode
| CE.EPSOS | 1 … 1 | R | This code represents the form of the medication (e.g. tablet, capsule, liquid). The value of this code affects the units used in the substance administration quantity element – if the form is a tablet, for example, the unit is 1; if the form is a liquid, the unit will be part of UCUM. The value set is epSOSDoseForm, OID: 1.3.6.1.4.1.12559.11.10.1.3.1.42.2.
| epSOrial |
| |
| CONF | |
| Example | <epsos:formCode code="10211000" codeSystem="0.4.0.127.0.16.1.1.2.1" codeSystemName="EDQM" codeSystemVersion="2017-04-14" displayName="Capsule, soft">...</epsos:formCode> |
epsos:asContent
| | 0 … * | R | This structure describes the packaging of the medication. The element provides the code for the particular package. If the package has a brand name, it can be described in the element. The element described the capacity of the packaging. For example, to represent 30 tablets, the element at the level must indicate tablets as the form, value attribute of the element must have the value of 30, and the unit attribute must be 1. In the cases where the unit attribute is not 1, UCUM units shall be used. The value set is epSOSUnits, OID 1.3.6.1.4.1.12559.11.10.1.3.1.42.16 and epSOSDoseForm, OID 1.3.6.1.4.1.12559.11.10.1.3.1.42.2. | epSOrial |
@classCode
| cs | 1 … 1 | F | CONT |
| Example | <epsos:asContent classCode="CONT"> <epsos:containerPackagedMedicine classCode="CONT" determinerCode="INSTANCE"> <epsos:name/> <epsos:formCode code=" " displayName=" " codeSystem=" " codeSystemName=" "/> <epsos:capacityQuantity value=" " unit=" "/> </epsos:containerPackagedMedicine></epsos:asContent> |
epsos:containerPackagedMedicine
| | 1 … * | R | | epSOrial |
@classCode
| cs | 1 … 1 | F | CONT |
@determinerCode
| cs | 1 … 1 | F | INSTANCE |
| Example | <epsos:containerPackagedMedicine classCode="CONT" determinerCode="INSTANCE">...</epsos:containerPackagedMedicine> |
epsos:name
| ST | 0 … * | R | | epSOrial |
| Example | <epsos:name>...</epsos:name> |
epsos:formCode
| CE.EPSOS | 1 … 1 | R | | epSOrial |
| CONF | |
| Example | <epsos:formCode code="10100500" codeSystem="0.4.0.127.0.16.1.1.2.1" displayName="Concentrate for oral suspension"/> |
epsos:capacityQuantity
| PQ | 1 … 1 | M | | epSOrial |
| |
@unit
| cs | 1 … 1 | R | |
| CONF | |
@value
| | 1 … 1 | R | |
| Example | <epsos:capacityQuantity unit="1" value="700"/> |
epsos:asSpecializedKind
| | 0 … 1 | R | This module is used for representing the classification of the Substance according to the WHO Anatomical Therapeutic Chemical (ATC) Classification System.
The classCode of "GEN" identifies this structure as the representation of a generic equivalent of the medication described in the current Medicine entry.
The <epsos:code> element contains the ATC code, and the <epsos:name> element may be used for the plain text representation. | epSOrial |
@classCode
| cs | 1 … 1 | F | GEN |
| Example | <epsos:asSpecializedKind classCode="GEN"> <epsos:generalizedMedicineClass classCode="MMAT"> <epsos:code code=" " codeSystem="2.16.840.1.113883.6.73" codeSystemName="Anatomical Therapeutic Chemical" displayName=" "/> <epsos:name/> </epsos:generalizedMedicineClass></epsos:asSpecializedKind> |
epsos:generalizedMedicineClass
| | | R | | epSOrial |
@classCode
| cs | 1 … 1 | F | MMAT |
epsos:code
| CD.EPSOS | 1 … 1 | R | | epSOrial |
| CONF | |
epsos:name
| | 0 … 1 | | | epSOrial |
epsos:ingredient
| | 0 … * | R | One or more active ingredients may be represented with this structure. The classCode of "ACTI" indicates that this is an active ingredient. The element contains the coded representation of the ingredient and the element may be used for the plain text representation. | epSOrial |
@classCode
| cs | 1 … 1 | F | ACTI |
@determinerCode
| cs | 1 … 1 | F | KIND |
| Example | <epsos:ingredient classCode="ACTI">...</epsos:ingredient> |
epsos:quantity
| | 1 … 1 | M | The medication strength is represented as the ratio of the active ingredient(s) to a unit of medication. The element contains the numerator and denominator of the strength ratio. | epSOrial |
| |
| Example | <epsos:quantity>...</epsos:quantity> |
epsos:numerator
| epsos:PQ | 1 … 1 | R | | epSOrial |
@unit
| cs | 1 … 1 | R | |
@value
| | 1 … 1 | R | |
| Example | <epsos:numerator unit="mg" value="20" xsi:type="epsos:PQ"/> |
epsos:denominator
| epsos:PQ | 1 … 1 | R | | epSOrial |
@unit
| cs | 1 … 1 | R | |
@value
| | 1 … 1 | R | |
| Example | <epsos:denominator unit="1" value="1" xsi:type="epsos:PQ"/> |
epsos:ingredient
| CD.EPSOS | 1 … 1 | R | | epSOrial |
epsos:code
| CD.EPSOS | 1 … 1 | R | | epSOrial |
| |
| CONF | |
epsos:originalText
| ED | 0 … * | | | epSOrial |
epsos:reference
| TEL | 0 … * | | | epSOrial |
epsos:translation
| CD | 0 … * | | This element can be used to provide alternative identifications for the described substance. | epSOrial |
epsos:name
| | 0 … 1 | | Name of the substance | epSOrial |
| |