Id2.16.840.1.113883.10.22.4.10Effective Date2017‑03‑02
Statuspending Under pre-publication reviewVersion LabelSTU1
NameIPSResultObservationDisplay NameIPS Result Observation
Description
This generic template is the basic set of constraints, which apply to any kind of observation grouped in a Result Organizer. The IPS Result Observation template is generic. It is further specialized by child templates, which  constrain  clinical laboratory observations or radiology observations or anatomic pathology observations. The generic IPS Result Observation template is usable in a patient summary for observations, which do not fall within one of the specialized categories.  
The result observation includes a statusCode to allow recording the status of an observation. “Pending” results (e.g., a test has been run but results have not been reported yet) should be represented as “active” ActStatus. However, in most cases, observations selected for an international patient summary are  results that are final and approved, and thus, have a "completed" statusCode.
The result of the observation may be commented through an entryRelationship introducing an "IPS Comment activity" template.
ContextParent nodes of template element with id 2.16.840.1.113883.10.22.4.10
ClassificationCDA Entry Level Template
Open/ClosedOpen (other than defined elements are allowed)
Associated with
Associated with 4 concepts
IdNameData Set
hl7ips-dataelement-144draft Observation Type draft CEN/TC 251 prEN 17269
hl7ips-dataelement-143draft Date of observation draft CEN/TC 251 prEN 17269
hl7ips-dataelement-145draft Value draft CEN/TC 251 prEN 17269
hl7ips-dataelement-106draft Observation Result draft CEN/TC 251 prEN 17269
Used by / Uses
Used by 0 transactions and 2 templates, Uses 2 templates
Used by as NameVersion
2.16.840.1.113883.10.22.3.14linkpending IPS Results Section (STU1)2017‑04‑30
2.16.840.1.113883.10.22.4.9Containmentpending IPS Result Organizer (STU1)2017‑03‑02
Uses as NameVersion
2.16.840.1.113883.10.22.4.14Containmentpending IPS Body Author (STU1)DYNAMIC
2.16.840.1.113883.10.22.4.22Containmentpending IPS Comment Activity (STU1)DYNAMIC
RelationshipAdaptation: template 2.16.840.1.113883.10.12.303 CDA Observation (2005‑09‑07)
ref
ad1bbr-

Adaptation: template 2.16.840.1.113883.10.20.22.4.2 Result Observation (V3) (2015‑08‑01)
ref
ccda-
Example
Example
<observation classCode="OBS" moodCode="EVN">
  <templateId root="2.16.840.1.113883.10.22.4.10"/>  <id root="1.2.3.999" extension="__example only__"/>  <code code="..." codeSystem="1.2.3.999"/>  <statusCode/>  <effectiveTime>
    <low value="20170721091742"/>  </effectiveTime>
  <value xsi:type="PQ" value="136" unit="mmol/L"/>  <interpretationCode code="..." codeSystem="2.16.840.1.113883.5.83"/>  <methodCode code="..." codeSystem="1.2.3.999"/>  <targetSiteCode code="..." codeSystem="1.2.3.999"/>  <author>
    <!-- template 2.16.840.1.113883.10.22.4.14 'IPS Body Author' (dynamic) -->
  </author>
  <referenceRange>
    <observationRange>
      <value xsi:type="PQ" value=".." unit="..."/>      <interpretationCode code="N" codeSystem="2.16.840.1.113883.5.83" displayName="Normal"/>    </observationRange>
  </referenceRange>
  <entryRelationship typeCode="COMP">
    <!-- template 2.16.840.1.113883.10.22.4.22 'IPS Comment Activity' (dynamic) -->
  </entryRelationship>
</observation>
ItemDTCardConfDescriptionLabel
hl7:observation
IPSRdotstion
 
target
hl7ips-dataelement-106draft Observation Result draft CEN/TC 251 prEN 17269
@classCode
cs1 … 1FOBS
@moodCode
cs1 … 1FEVN
hl7:templateId
II1 … 1MIPSRdotstion
@root
uid1 … 1F2.16.840.1.113883.10.22.4.10
hl7:id
II0 … *RIPSRdotstion
hl7:code
CD.IPS1 … 1MIPSRdotstion
 
target
hl7ips-dataelement-144draft Observation Type draft CEN/TC 251 prEN 17269
 CONF
The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.38 IPS Results Observation (DYNAMIC)
hl7:statusCode
CS1 … 1MIPSRdotstion
hl7:effectiveTime
IVL_TS1 … 1RIPSRdotstion
 
target
hl7ips-dataelement-143draft Date of observation draft CEN/TC 251 prEN 17269
Choice1 … 1Elements to choose from:
  • hl7:value[@xsi:type='CE.IPS']
  • hl7:value[@xsi:type='PQ']
  • hl7:value[@xsi:type='IVL_PQ']
  • hl7:value[@xsi:type='ST']
  • hl7:value[@xsi:type='TS']
  • hl7:value[@xsi:type='RTO_QTY_QTY']
hl7:value
CE.IPS0 … 1RIPSRdotstion
where [@xsi:type='CE.IPS']
 
target
hl7ips-dataelement-145draft Value draft CEN/TC 251 prEN 17269
 Example
Result code: code '201' from code system 2.16.840.1.113883.2.4.4.30.1045
<value xsi:type="CE" code="201" codeSystem="2.16.840.1.113883.2.4.4.30.1045" displayName="regular"/>
 Example
Result code: code 'POS' from code system 2.16.840.1.113883.5.83
<value xsi:type="CE" code="POS" codeSystem="2.16.840.1.113883.5.83"/>
hl7:value
PQ0 … 1RIPSRdotstion
where [@xsi:type='PQ']
 ConstraintIf Observation/value is a physical quantity (xsi:type="PQ"), the unit of measure SHALL be selected from ValueSet UnitsOfMeasureCaseSensitive 2.16.840.1.113883.1.11.12839 DYNAMIC
 Example
Result physical quantity (data type PQ): 136 mmol per liter
<value xsi:type="PQ" value="136" unit="mmol/L"/>
hl7:value
IVL_PQ0 … 1RIPSRdotstion
where [@xsi:type='IVL_PQ']
 Example
Result interval of physical quantities (data type IVL_PQ): 150 - 400 Milliard per 10 exp 9 liter
<value xsi:type="IVL_PQ">
  <low value="150" unit="10+9/l"/>  <high value="400" unit="10+9/l"/></value>
hl7:value
ST0 … 1RIPSRdotstion
where [@xsi:type='ST']
 Example
Result free text (data type ST)
<value xsi:type="ST">This is a result as a free text</value>
hl7:value
TS0 … 1RIPSRdotstion
where [@xsi:type='TS']
 Example
Result time stamp (data type TS): 6-Aug-2014
<value xsi:type="TS" value="20140806"/>
hl7:value
RTO_QTY_QTY0 … 1RIPSRdotstion
where [@xsi:type='RTO_QTY_QTY']
 Example
Result ratio (data type RTO_QTY_QTY): 1/179
<value xsi:type="RTO_QTY_QTY">
  <numerator xsi:type="INT" value="1"/>  <denominator xsi:type="INT" value="179"/></value>
hl7:interpretationCode
CE.IPS0 … 1RIPSRdotstion
 CONF
The value of @code shall be drawn from value set 2.16.840.1.113883.1.11.78 ObservationInterpretation (DYNAMIC)
hl7:targetSiteCode
CD.IPS (preferred)0 … 1IPSRdotstion
 CONF
The value of @code comes preferably from value set 2.16.840.1.113883.11.22.55 IPS Target Site (DYNAMIC)
hl7:author
0 … *RContains 2.16.840.1.113883.10.22.4.14 IPS Body Author (DYNAMIC)IPSRdotstion
hl7:referenceRange
0 … *RIPSRdotstion
hl7:observationRange
1 … 1MIPSRdotstion
hl7:code
CDNPIPSRdotstion
hl7:value
ANY1 … 1MIPSRdotstion
hl7:interpretationCode
CE0 … 1IPSRdotstion
@code
CONF0 … 1FN
@codeSystem
0 … 1F2.16.840.1.113883.5.83
hl7:entryRelationship
0 … *Contains 2.16.840.1.113883.10.22.4.22 IPS Comment Activity (DYNAMIC)IPSRdotstion
@typeCode
cs1 … 1FCOMP